10GHz monitor change
From 30-05-2021 The receiver has been changed to a transverter type with 144MHz output. So to monitor 10368.930 you must set the receiver to 144.930. Antenna direction is unchanged. OZ2TG, Steen
Continue reading →Yearly Archives: 2021
Problems with Arduino Leonardo Serial interface
The leonardo board is different from other Arduino boards, because it uses a different processor with build in USB interface. So when i developed my program evrything went fine when using the arduino environment with its serial monitor. But when … Continue reading →
Trials with pro micro aka Arduino Leonardo
I bought a couple of cheap Leonardo boards , named pro micro. They where suposed to be able to operate on 3.3V, and could solve the problem of controlling ADF4153 PLL SPI bus working on 3.3V . I used to … Continue reading →
New 70cm vertical
For a long time i have not had any antenna for 70cm. Some weeks ago i visited Allan oz1GIN ( formerly OZ1LIT), and he had bougth some old, but unused Procom antennas: There were not any clams supplied, but i … Continue reading →
Quantum communications
A lot of talk about quntum computers has been heard. But that the technology can also be used to improve microwave systems , was unknovn to me. I recently watched a youtube video covering the subject : https://www.youtube.com/watch?v=4E7e3zq4SOc&t=1937s The video … Continue reading →
122Ghz dish
Today i finished the 45cm dish project, mechanical part. There is a short desciption in the 122Ghz pages. Next step will be to test it in the field.
Continue reading →OZ IQcombiner
The PCB’s for the IQcombiner v3 has arrived, more info on my 122GHz page
Continue reading →10GHz band monitor
In my summer QTH in JO55RT i have installed a system which can monitor the 10GHz band via an remote WEB connection. The antenna is a 60cm dish pointing towards south-West (270deg). The direction was choosen to be able to … Continue reading →